Note: Please do not link down into my pages. I change this directory structure often and your links will not work correctly.
![]() | ![]() |
Subminiature type used as a general purpose amplifier in subminiature equipment. Requires either a subminiature socket or direct soldering of the wires from the tube to circuit components.
EIA Outline ................................... 3-1
EIA Base ...................................... 8DG
Heater Voltage ................................ 6.3 V
Heater Current ................................ 0.3 A
Each Section
Input ......................................... 1.9 pf
Output ........................................ 1.5 pf
Grid to Plate ................................. 1.0 pf
Each Section
Plate Voltage ................................. 165 V
Plate Dissipation ............................. 0.3 W
Class A Amplifier
Plate Voltage ................................. 150 V
Grid No. 1 Voltage Derived from
Cathode Bias Resistor ...................... 820 Ω
Amplification Factor .......................... 70
Plate Resistance (approx) ..................... 28K Ω
Transconductance .............................. 2500 µ
Plate Current ................................. 1.75 mA
Class A Amplifier
Plate Voltage ................................. 100 V
Grid No. 1 Voltage Derived from
Cathode Bias Resistor ...................... 1500 Ω
Amplification Factor .......................... 70
Plate Resistance (approx) ..................... 39K Ω
Transconductance .............................. 1800 µ
Plate Current ................................. 0.8 mA
If you are uncertain about the EIA designator for a particular tube please use the "Index" button to list all the tubes in the database. You can click on the designator for the closest tube.
(c) 1994-2021 by William A. Beech, NJ7P
Sat, 25 Mar 2023 04:51:09 -0700