Note: Please do not link down into my pages. I change this directory structure often and your links will not work correctly.
![]() | ![]() |
Subminiature type used as rf or if amplifier and oscillator in subminiature equipment. Requires either a subminiature socket or direct soldering of the wires from the tube to circuit components.
EIA Outline ................................... 3-1
EIA Base ...................................... 8DC
Heater Voltage ................................ 26.5 V
Heater Current ................................ 0.045 A
Pentode
Plate Voltage ................................. 165 V
Grid No. 2 Voltage ............................ 155 V
Plate Dissipation ............................. 1.1 W
Grid No. 2 Dissipation ........................ 0.7 W
Class A Amplifier
Plate Voltage ................................. 100 V
Grid No. 2 Voltage ............................ 100 V
Grid No. 1 Voltage Derived from
Cathode Bias Resistor ...................... 150 Ω
Plate Resistance (approx) ..................... 110K Ω
Transconductance .............................. 3200 µ
Plate Current ................................. 5.3 mA
Grid No. 2 Current ............................ 3.6 mA
Class A Amplifier
Plate Voltage ................................. 100 V
Grid No. 2 Voltage ............................ 100 V
Grid No. 1 Voltage Derived from
Cathode Bias Resistor ...................... 150 Ω
Plate Resistance (approx) ..................... 50K Ω
Transconductance .............................. 1950 µ
Plate Current ................................. 4.0 mA
Grid No. 2 Current ............................ 5.8 mA
If you are uncertain about the EIA designator for a particular tube please use the "Index" button to list all the tubes in the database. You can click on the designator for the closest tube.
(c) 1994-2021 by William A. Beech, NJ7P
Sat, 25 Mar 2023 19:49:14 -0700