Note: Please do not link down into my pages. I change this directory structure often and your links will not work correctly.
![]() |
Source ........................................ Sylvania - 1959
EIA Base ...................................... 11L
Minimum Useful Screen Diameter ................ 1-3/4 In.
Source ........................................ Sylvania - 1959
Focusing Method ............................... Sylvania - 1959
Deflecting Method ............................. Electrostatic
Deflecting Angle (approx) ..................... Electrostatic Deg.
Fluorescence ............................... P1
Phosphorescence ............................ Green
Faceplate ..................................... Medium
Source ........................................ Sylvania - 1959
Heater Voltage ................................ 6.3 V
Heater Current ................................ 0.6 A
Maximum Heater-Cathode Voltage
Heater Positive with Respect to Cathode
DC Component ............................ 10 V
Heater Negative with Respect to Cathode
DC Component ............................ 125 V
Oscilloscope
Source ........................................ Sylvania - 1959
Cathode to All Other .......................... 5.5 pf
Grid to All Other ............................. 8.0 pf
Between D1 & D2 ............................... 0.6 pf
Between D3 & D4 ............................... 1.1 pf
D1 to All Others .............................. 8.5 pf
D3 to All Others .............................. 9.0 pf
D1 to All But D2 .............................. 8.0 pf
D2 to All But D1 .............................. 4.6 pf
D3 to All But D4 .............................. 7.5 pf
D4 to All But D3 .............................. 6.0 pf
Oscilloscope
Source ........................................ Sylvania - 1959
Anode No. 2 Voltage ........................... 1100 V
Anode No. 1 Voltage ........................... 550 V
Grid Voltage
Negative Bias Value ........................ 125 V
Positive Bias Voltage ...................... 0 V
Peak Voltage Between Anode No. 2 and
Any Deflection Plate ....................... 660 V
Grid Circuit Resistance ....................... 1.5M Ω
Deflection Circuit Resistance ................. 5.0M Ω
Oscilloscope
Source ........................................ Sylvania - 1959
Anode No. 2 Voltage ........................... 500 V
Anode No. 1 Voltage ........................... 125 V
Grid No. 1 Voltage Required for Cutoff ........ -30 V
Deflection Factor
Deflecting Plates No. 1 & 2 ................... 115 V/In
Deflecting Plates No. 3 & 4 ................... 97 V/In
Oscilloscope
Source ........................................ Sylvania - 1959
Anode No. 2 Voltage ........................... 1000 V
Anode No. 1 Voltage ........................... 137 to 300 V
Grid No. 1 Voltage Required for Cutoff ........ -30 to -90 V
Deflection Factor
Deflecting Plates No. 1 & 2 ................... 204 to 256 V/In
Deflecting Plates No. 3 & 4 ................... 157 to 235 V/In
Source ........................................ Sylvania - 1959
1. Brilliance and definition decrease with decreasing Anode No. 2 voltage. In general, Anode No. 2 voltage should not be less than 500 volts.
If you are uncertain about the EIA designator for a particular tube please use the "Index" button to list all the tubes in the database. You can click on the designator for the closest tube.
(c) 1994-2021 by William A. Beech, NJ7P
Mon, 15 Aug 2022 17:08:59 -0700